The job
A preset-click format with a 3/8-inch drive; attachments are separate, and fine adjustment and delivered length need confirmation.
Park Tool · Torque tool
Park Tool 2–14 Nm Click Torque Wrench
A preset-click format with a 3/8-inch drive; attachments are separate, and fine adjustment and delivered length need confirmation.
$99.95Nov 7, 26, 01:01 AM · New York
Add to cart Price info
This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Opens this product on Amazon. Check the selected offer, contents and current price there.
- Concordant torque range 2–14 Nm
- Drive 3/8 in
- Indication Preset click type
Concordant torque range
2–14 Nm
Match the component’s required value
The actual fastener instructions determine the target. A supported range does not make every bicycle fastener suitable.
What this choice changes
Preset click indication with a 3/8-inch drive
This Park Tool click wrench lets you preset a supported torque value, then use its click indication during the specified tightening operation. Its 2–14 Nm range should be compared with the actual fastener requirement, and the 3/8-inch drive with your existing attachments. Sockets, bits and crowfeet are separate, so include the required connection in the budget.
Unlike a beam wrench, this format gives a preset indication rather than requiring continuous visual reading of the applied torque. The maker describes registration for left- and right-hand threads and a protective case. Its stated ±4% calibration specification is a model claim, not a current calibration record for the individual unit you receive.
Choose the attachment and available access as carefully as the wrench itself. A matching 3/8-inch drive does not make every socket appropriate to the component. For a higher measured range or continuous visual reading, compare the TW-2.2 beam format rather than using this lower-range click tool as a general ratchet.
Specifications & supplied details
| Detail | Specification |
|---|---|
| Concordant torque range | 2–14 Nm |
| Drive | 3/8 in |
| Indication | Preset click type |
| Thread direction | Left/right registration stated by maker and selected description |
| Maker calibration specification | ±4%; not an individual received-unit certificate |
| Separate | Sockets, bits and crowfeet |
| Storage | Protective case |
Choose for your actual setup
Match the component’s required value
The actual fastener instructions determine the target. A supported range does not make every bicycle fastener suitable.
Confirm revision-specific details
Do not choose from an assumed 0.2/0.4 Nm increment or 7.5/9-inch delivered length.
Fit checks & limits
- The selector/title says 7.5 in while body prose says 9 in. The dated 2020 maker catalogue states 0.4 Nm adjustment and the current page 0.2 Nm. Delivered length and fine increment remain unresolved; no generation-change date is inferred.
- Do not exceed the stated 14 Nm maximum; the maker excludes general-purpose ratchet use.
- No universal protection for carbon components or guarantee against overtightening.
Questions before you choose
Is the adjustment step definitely 0.2 Nm?
No. The current maker page says 0.2 Nm and its dated 2020 catalogue says 0.4 Nm. The exact supplied increment is not established.
Are sockets or bits included?
No socket/bit set is established. Provide suitable attachments for the 3/8-inch drive.
How does it differ from the TW-2.2 beam wrench?
This is a lower-range preset-click format. TW-2.2 uses a visual beam scale and a separately stated higher range; it does not click at a preset value.
Guides for this choice
Alternatives to compare
Selected listing details, manufacturer information and source images were compared. No hands-on trial or universal fit is claimed. Product identifier: B0029LKYOU.